Re-Saving an Instrument State
If you re-save a file, the analyzer overwrites the existing file contents.
You cannot re-save a file that contains data only. You must create a new file.
NOTE
1. Press
Save/Recall
INTERNAL MEMORY
INTERNAL DISK
EXTERNAL DISK
"Saving an Instrument State" on page
2. Press
RETURN
highlight the name of the file that you want to re-save.
3. Press
RE-SAVE STATE YES
and select the storage device.
SELECT DISK
(If necessary, refer to the external disk setup procedure in
and then use the
.
Printing, Plotting, and Saving Measurement Results
4-41.)
or
key or the front-panel knob to
Re-Saving an Instrument State
4-51