Step 4. Measure The Device Under Test; Step 5. Output The Measurement Results - Agilent Technologies 8753ET User Manual

Making Measurements
Making a Basic Measurement

Step 4. Measure the device under test.

Replace any standard used for error-correction with the device under test.
To measure the insertion loss of the bandpass filter, press:
SEARCH: MAX
Marker Search

Step 5. Output the measurement results.

To create a printed copy of the measurement results, press:
PRINT MONOCHROME
Copy
Refer to Chapter 4 , "Printing, Plotting, and Saving Measurement Results,"
procedures on how to set up a printer and define a print, plot, or save results.
1-6
(or )
PLOT
for