Printing Or Plotting The List Values Or Operating Parameters; If You Want A Single Page Of Values; If You Want The Entire List Of Values - Agilent Technologies 8753ET User Manual

Printing or Plotting the List Values or Operating
Parameters
Press
Copy LIST
• Choose
LIST VALUES
their current values, to appear on your hardcopy. This list will also include the limit test
information, if you have the limits function activated.
• Choose
OP PARMS (MKRS etc)
both measurement channels to appear on your hardcopy. The parameters include:
operating parameters, marker parameters, and system parameters that relate to the
control of peripheral devices.

If You Want a Single Page of Values

1. Choose
PRINT MONOCHROME
create a hardcopy of the displayed page of listed values.
2. Press
NEXT PAGE
to display the previous page of listed values. Or, you can press
PREVIOUS PAGE
want to appear on your hardcopy. Then repeat the previous step to create the hardcopy.
3. Repeat the previous two steps until you have created hardcopies for all the desired
pages of listed values.
If you are printing the list of measurement data points, each page contains 30 lines of data.
The number of pages is determined by the number of measurement points that you have
selected.

If You Want the Entire List of Values

Choose
PRINT ALL
NOTE If you are printing the list of operating parameters, only the first four pages
are printed. The fifth page, system parameters, is printed by displaying that
page and then pressing
and select the information that you want to appear on your hardcopy.
if you want a tabular listing of the measured data points, and
if you want a tabular listing of the parameters for
for a printer or
to display the next page of listed values. Press
repeatedly to display a particular page of listed values that you
to print all pages of the listed values.
PRINT
Printing, Plotting, and Saving Measurement Results

Printing or Plotting the List Values or Operating Parameters

for a plotter peripheral, to
PLOT
.
PREVIOUS PAGE
or
NEXT PAGE
4-37