Making Mixer Measurements
Measurement Considerations
Figure 2-5. Example of Conversion Loss versus Output Frequency With Correct
IF Signal Path Filtering and Attenuation at all Mixer Ports
How RF and IF Are Defined
When you choose between
and
in the frequency offset menus, the
RF < LO
RF > LO
analyzer determines which direction the internal source must sweep in order to achieve
the requested IF frequency. For example, to measure the lower sideband of a mixer, where
the RF signal is below the LO (
), the internal source must sweep backwards. See
RF < LO
the examples in
Figure
2-6.
2-7