Printing, Plotting, and Saving Measurement Results
Plotting Multiple Measurements Per Page from Disk
Figure 4-10 Plotting Two Files on the Same Page
To Plot Measurements in Page Quadrants
1. Define the plot, as explained in
2. Press
SEL QUAD
Copy
3. Choose the quadrant where you want your displayed measurement to appear on the
hardcopy. The selected quadrant appears in the brackets under
Figure 4-11 Plot Quadrants
4. Press
. The analyzer assigns the first available default filename for the selected
PLOT
quadrant. For example, the analyzer would assign PLOT01LU if there were no other
left-upper quadrant plots on the disk.
4-32
"Defining a Plot Function" on page
.
4-15.
.
SEL QUAD