Step 2. Store The Exit Hpgl Mode And Form Feed Sequence; Step 3. Send The Hpgl Initialization Sequence To The Printer; Step 4. Send The Plot File To The Printer; Step 5. Send The Exit Hpgl Mode And Form Feed Sequence To The Printer - Agilent Technologies 8753ET User Manual

Step 2. Store the exit HPGL mode and form feed sequence.

1. Create a test file by typing in each character as shown in the left column of
Table 4-8. Do not insert spaces or linefeeds.
2. Name the file exithpgl.
Table 4-8 HPGL Test File Commands
Command
<esc>%0A
<esc>E

Step 3. Send the HPGL initialization sequence to the printer.

Type print hpglinit to send the initialization sequence to the printer.
Step 4. Send the plot file to the printer.
Type print filename (where filename is the name of the HPGL plot file) to send the
plot file to the printer.
Step 5. Send the exit HPGL mode and form feed sequence to the
printer.
Type print exithpgl to send the HPGL mode and form feed sequence to the printer.
Outputting Plot Files from a PC to an HPGL Compatible Printer
Remark
exit HPGL mode
form feed
Printing, Plotting, and Saving Measurement Results
4-27