Operating Concepts
Using This Chapter
Using This Chapter
This chapter provides conceptual information on how specific functions of the network
analyzer operate. The following topics are discussed:
• System operation
• Data processing
• Output Power
• Sweep Time
• Source Attenuator Switch Protection
• Channel Stimulus Coupling
• Sweep Types
• S-parameters
• Analyzer Display formats
• Electrical Delay
• Noise reduction techniques
• Measurement Calibration
• Calibration Routines
• Modifying Calibration Kits
• TRL/LRM Calibration
• GPIB Operation
• Limit Line Operation
• Knowing Instrument Modes
Where to Find More Information
• Operation concepts relating to mixer measurements and time domain measurements
can be found in
Chapter 2 , "Making Mixer Measurements"
Time Domain Measurements."
• Descriptions of all instrument functions are located in the "Hardkey/Softkey Reference"
chapter of the reference guide.
• Procedures for using instrument functions, making measurements, recording
measurement results, and performing calibrations are located in
Measurements"
and
7-2
Chapter 6 , "Calibrating for Increased Measurement Accuracy."
and
Chapter 3 , "Making
Chapter 1 , "Making