Agilent Technologies 8753ET User Manual page 26

Figure 1-8 Example Dual Channel with Split Display On
3. To return to a single-graticule display, press:
NOTE You can control the stimulus functions of the two channels independent of
each other by pressing
Dual Channel Mode with Decoupled Stimulus
The stimulus functions of the two channels can be controlled independently using
COUPLED CH ON off
independently for each channel using
menu, under the
Marker Fctn
ES models only: For dual channel, if channels are uncoupled and you have
NOTE
full 2-port calibrations on both channels, you will not be able to select a
non-ratioed measurement. For example, you can measure S
input B.
Auxiliary channels 3 and 4 are permanently coupled by stimulus to primary
NOTE
channels 1 and 2, respectively. Decoupling the primary channels' stimulus
from each other does not affect the stimulus coupling between the auxiliary
channels and their primary channels.
Sweep Setup
in the stimulus menu. In addition, the markers can be controlled
MARKERS: UNCOUPLED
key.
.
SPLIT DISPLAY 1X
COUPLED CH OFF
in the marker mode
Making Measurements
Using Display Functions
.
or B/R, but not
21
1-13