Format an USB mem-
ory stick step-by-step
12.5
☞
☞
Insert a SD card step-
by-step
Data Management
4.
The cap of a Leica industrial grade USB memory stick can be stored
on the underside of the compartment lid.
5.
Close the compartment lid and turn the knob to lock the compart-
ment closed.
Formatting the USB memory stick before starting to store data is required if a
completely new USB memory stick is used, or if all existing data needs to be
deleted.
☞
The formatting function on the instrument only works for Leica USB
memory sticks. All other USB memory sticks should be formatted on
a computer.
☞
Despite an automatic defragmentation, the USB memory stick gets
fragmented after a while. Please format the USB memory stick peri-
odically to maintain the instrument performance.
1.
Select the Manage page in the Main Menu.
2.
Select the USB-Stick.
3.
Press
Format.
4.
A warning message will appear.
☞
By activating the format command all data will be lost. Make sure
that all important data has been backed up before formatting.
5.
Press Yes.
6.
A message will display once the formatting is completed. Press Cont.
Working with the SD Card
•
Keep the card dry.
Use it only within the specified temperature range.
•
Do not bend the card.
•
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
3
3
2
2
0016343_001
☞
The SD card is inserted into a slot inside the compartment below the
Leica logo.
1.
Turn the knob on the compartment cover to unlock.
2.
Open the lid of the compartment.
5 5
171