7.6.3
Description
Access
96
Description of fields
Field
Option
Ref. Height
Start Point
End Point
Interpolated
No Height
Next step
Select Cont and then Meas Pt or Setout to proceed to a subapp.
Measure Line & Offset
The Measure Line & Offset subapp calculates from measurements or coordi-
nates, longitudinal and orthogonal offsets and height differences of the target
point relative to the reference arc.
Example reference arc - measure line & offset
P4
d2+
d1+
P3
P1
P0
TSOX_036
Press Meas from the Reference Arc - Info screen.
Description
Depending on the task chosen this parame-
ter determines the design height.
When measuring to a line, it affects the
•
height difference value.
When staking, it affects the delta height
•
value.
Heights are computed relative to the height
of the starting point of the line.
Heights are computed relative to the height
of the end point of the line.
Heights are computed along the line.
Heights are ignored
P0 Instrument station
P2
P1 Start point
P2 End point
P3 Measured point
P4 Reference point
d1+ D Offset
d2+ D Line
Apps