Traverse; Overview - Leica TS03 User Manual

Access
Slope Check Hinge
Val.
Next step
7.14
7.14.1
☞
134
Press Ch Slp from the Setout/Check/Slope values screen.
Description of fields
Field Option
Offset Selectable list
Chainage Display only
Offs.Hng Display only
ΔH Hinge Display only
Act. Slp Display only
Hinge Display only
Height Display only
Offs.Aln Display only
ΔH Aln Display only
Aln Display only
Either, press Meas to measure and record.
•
• Or, press ESC to return to the Setout/Check/Slope values screen.
Or, continue selecting ESC to exit the application.
•

Traverse

Overview

Traverse can be trialled 15 times. After 15 trials, it is necessary to enter a
licence code.
Description
Defined horizontal offset. Left, Right or Cen-
ter.
Current chainage from measured point.
Offset to hinge. Measured offset to the hori-
zontal alignment including offset right and
offset left.
Height difference to the hinge point. The ver-
tical offset between the defined height at
the current chainage, and the measured
position including defined height difference.
The measured slope ratio of the measured
point to the hinge point.
Slope distance from the measured point to
the hinge point.
Height value of the measured point.
Measured offset to the horizontal alignment
excluding offset right and offset left.
Height difference to the alignment. The verti-
cal offset between defined height at the cur-
rent chainage, and the measured position,
excluding the defined height difference.
Slope distance from the measured point to
the alignment.
Apps