Area To Reference Plane - Leica TS03 User Manual

7.9.3
Area to Reference
Plane
Apps
Description of fields
Field Option
A 2D Display only
A 3D Display only
Next step
Press Calc to calculate area and volume and proceed to the 2D / 3D Area
Results screen.
In the 2D / 3D Area Results screen.
•
View the area in ha and m
Press NewArea to define a new area.
•
Or, press End to exit the app.
•

Area to Reference Plane

1. Measure three new points or select three existing points to define
the reference plane.
2. Then measure or select existing points to define the area.
3. The 2D and 3D areas are calculated automatically and displayed once
three points have been measured or selected.
Key Description
Calc To display and record additional results.
1PtBack To undo measurement or selection of the previous point.
Description
Two-dimensional area calculated by projec-
tion onto a horizontal plane.
Three-dimensional area calculated by projec-
tion onto an automatically defined horizontal
reference plane.
The 3D area is calculated based on the fol-
lowing:
The system will use the three points
•
which cover the largest area.
If there are two or more equal largest
•
areas, the system will use the area with
the shortest perimeter.
If the largest areas have equal perime-
•
ters, the system will use the area with
the last measured point.
2
as well as the perimeter of the area.
107