Leica TS03 User Manual page 45

Settings
Field Option
Target
Height
Code
Hz angle
V angle
Hor. dist.
Slope dist.
Height diff.
Easting
Northing
Height
Line space
Show in Measure-
Map ments
Fixpoints
Meas &
Fixpts
Show PtID Yes
No
Show Yes
PtCode
No
Only 50 Pts Yes
No
Centre to
Station
Target
Description
Input field for prism height.
Editable field for codes.
Display only field for the horizontal angle.
Display only field for vertical angle.
Display only field for horizontal distance.
Display only field for measured slope dis-
tance.
Display only field for the height difference
between station and reflector.
Display only field for Easting coordinate of
measured point.
Display only field for Northing coordinate of
measured point.
Display only field for the height coordinate of
the measured point.
Insert full line space.
To display only measured points.
To display only fixpoints.
To display measured points and fixpoints.
The ID of a point is displayed in the map.
Display of point IDs in the map is deactiva-
ted.
The code of a point is displayed in the map.
Display of point codes in the map is deacti-
vated.
Only the first 50 point labels are displayed in
the map.
All point labels are displayed in the map,
regardless of the number of points in the
job.
The selection changes the behaviour of the
icon on the Mapview toolbar and the naming
of the corresponding softkey.
To centre the map on the instrument.
To centre the map on the target.
45