Leica TS03 User Manual page 167

☞
☞
☞
☞
Data Management
4.
5.
Examples:
Exported points without labels:
Exported points with labels:
Exported points with labels and
identifier:
6. A message will display confirming the successful export of data.
Measurement data are stored in chronological order – line by line - on the
instrument.The XML data format and other format files do not output data
chronologically but sort the data in separate blocks. During the data export in
XML data format or other format files, the instrument has to search the whole
memory until the required data is found. Therefore, the data transfer time var-
ies between formats. The GSI data format has the best transfer speed-per-
formance.
A '+', '-', '.' or alphanumerical characters should not be used as delimiter values
in ASCII files. These characters can also be part of the point ID or coordinate
values and if so, will generate errors where they occur in the ASCII file.
Road Data, Format and Backup data types, and the ASCII data format, are
only available for data exports to a USB memory stick, SD card and internal
memory. It is not possible via the RS232 serial interface.
All jobs, formats, codelists and configurations will be stored in the backup
folder created on the USB memory stick. The job data will be stored as individ-
For data format is DXF Cus-
tom:
Define the point type export,
image export, the X/Y/Z export,
the size of the point symbols
and the labelling plus coloring of
additional point information.
Define if identifiers are included
for additional point information.
Press Cont.
167