Leica TS03 User Manual page 105

Access
Map contents
Apps
b
a
P1
P4
P0
TSOX_049
P0 Instrument station
P1 Target point which defines the sloped reference plane
P2 Target point which defines the sloped reference plane
P3 Target point which defines the sloped reference plane
P4 Target point
a Perimeter (3D), polygonal length from the start point to the current
measured point of the area (3D)
b Area (3D), projected onto the sloped reference plane
c Perimeter (2D), polygonal length from the start point to the current
measured point of the area (2D)
d Area (2D), projected onto the horizontal plane
1. Select Apps from the Main Menu.
2. Select Area&Vol. from the Programs Menu.
3. Complete app pre-settings. Refer to "6 Apps - Getting Started".
4. Select an Area&Vol. subapp from the Area & DTM Volume Main
Menu.
The graphic on the Polar page shows the area projected onto the reference
plane. The points used for defining the reference plane are indicated by:
Icon Description
Measured point
Measured point active
Manually entered point
Manually entered point active
Station
Station active
Points defining the reference plane
P2
P3
c
d
105