Working With The Memory Device - Leica TS11 User Manual

4.10


Insert and remove
an SD card
step-by-step
Insert and remove a
USB stick
step-by-step
TS11, Operation

Working with the Memory Device

• Keep the card dry.
• Use it only within the specified temperature range.
• Do not bend the card.
• Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the card.
Step Description

The SD card is inserted into a slot inside the
Communication side cover of the instrument.
1. Turn the knob on the Communication side cover to
the vertical position to unlock the communication
compartment.
2. Open the lid of the communication compartment
to access the communication ports.
3. Slide the SD card firmly into the SD slot until it
clicks into position.

The card must be held with the contacts at
the top and facing toward the instrument.

Do not force the card into the slot.
4. Close the lid and turn the knob to the horizontal
position to lock the communication compartment.
5. To remove the SD card, open the lid of the commu-
nication compartment and gently press on the top
of the card to release it from the slot.
Step Description

The USB stick is inserted into the USB host port
inside the Communication side cover of the instru-
ment.
1. Turn the knob on the Communication side cover to
the vertical position to unlock the communication
compartment.
2. Open the lid of the communication compartment
to access the communication ports.
3. Slide the USB stick with the Leica logo facing you
firmly into the USB host port until it clicks into posi-
tion.

Do not force the USB stick into the port.
4. If desired, store the lid of the USB stick on the
underside of the compartment lid.
5. Close the lid and turn the knob to the horizontal
position to lock the compartment.
6. To remove the USB stick, open the lid of the
compartment and slide the USB stick out of the
port.
1
2
3
TS_091
1
4
2
3
TS_092
46