Quick Coding - Leica TS03 User Manual

Code
9.2
Description
154
Description of fields
Field Option
Code Editable field
Q-Code Editable field
Desc. Editable field
Info 1 to Editable field
Info 8
Key Description
New To create a new code.
Attrib. To add up to 8 attributes with up to 16 characters. Existing
code attributes can be overwritten with the following excep-
tions:
The codelist editor of Leica Infinity or a special TS Tools col-
lection can assign a status to the attributes. Attributes with
status "fixed" are write-protected. They cannot be overwrit-
ten or edited.
For attributes with status "Mandatory" an input or a confir-
mation is required. Attributes with status "Normal" can be
edited freely.
☞
Edit To edit quick code, description and attributes.
Description of columns
Column Description
First column Code name
Second col- Description of the code
umn

Quick Coding

Using quick coding, a predefined code can be called directly via the keypad on
the instrument. The code is selected by entering a two-digit number, the
measurement is then triggered and the measured data and code saved.
A total of 99 quick codes can be assigned.
Description
Code name.
Two digit quick code assigned to the code.
Refer to "9.2 Quick Coding".
Additional remarks.
More information lines, freely editable. Used
to describe attributes of the code.
The *.cls in the \CODES folder of the USB stick or
SD card is not changed.
Coding