Leica TS03 User Manual page 37

Change the intensity
of the laser plummet
Operation
3. Turn on the instrument, and, if tilt correction is set to On, the laser
plummet will be activated automatically, and the Level & Plummet
screen appears. Otherwise, press the Favourites key from within any
app and select Level & Plummet.
☞
For TS07, use the optional AutoHeight laser plummet for
vertically setting up the instrument over a ground point
and for measuring the instrument height when setting up
the station.
☞
The bubble of the electronic level and the arrows for the
rotating direction of the footscrews only appear if the
instrument tilt is inside a certain levelling range.
4. Centre the electronic level of the
first axis by turning the two
footscrews. Arrows show the
direction of rotation required.
The first axis is levelled, when
the bubble is exactly between
the squared brackets [] of the
single axis bubble tube.
☞
When levelled correctly, checkmarks are displayed. For the
Color and Color&Touch screens: If the instrument is not
levelled to one axis, then the icons for the single axis bub-
ble tube and the circular bubble are framed red, else they
are black.
5. Centre the electronic level for
the second axis by turning the
last footscrew. An arrow shows
the direction of rotation
required.
When all three bubbles are cen-
tred, the instrument has been
perfectly levelled up.
6. Accept with Cont.
External influences and the surface conditions may require the adjustment of
the intensity of the laser plummet.
In the Level & Plummet screen, adjust the intensity of the laser plummet
using the navigation key.
37