Working With Bluetooth; Working With The Sim Card - Leica TS03 User Manual

12.7
Description
Establishing a
connection step-by-
step
12.8
☞
☞
Insert a SIM card
step-by-step
Data Management

Working with Bluetooth

Instruments can communicate with external devices via a Bluetooth connection.
The instrument Bluetooth is a slave only. The Bluetooth of the external device
will be the master, and therefore will control the connection and any data
transfer.
1. On the instrument ensure that the communication parameters are
set to Bluetooth. Refer to "5.6 Interface Settings".
2. Activate Bluetooth on the external device. The steps required depend
on the Bluetooth driver and other device specific configurations.
Refer to the device user manual for information on how to configure
and search for a Bluetooth connection.
The instrument will appear on the external device as
"TS0x_y_zzzzzzz", where x = the series (TS07), y = the angular accu-
racy in arc seconds, and z = the serial number of the instrument. For
example, TS07_3_1234567.
3. Some devices ask for the identification number of the Bluetooth. The
default number for a TS07 Bluetooth is 0000.
4. The instrument Bluetooth sends out the instrument name and serial
number to the external Bluetooth device.
5. All further steps must be made in accordance to the user manual of
the external device.

Working with the SIM Card

Keep the card dry.
•
Use it only within the specified temperature range.
•
• Do not bend the card.
Protect the card from direct impacts.
•
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
☞
The SIM card is inserted into a slot behind the lid with the logo,
almost in the middle of the housing.
1. Turn the knob on the lid to unlock.
2. Open the lid.
173