Startup Sequence; System Information - Leica TS03 User Manual

5.10
Description
Access
Auto start step-by-
step
☞
5.11
Description
62
Menu selection
View Current Adj. Data
Adjustment Reminder

Startup Sequence

Through the Startup tool, it is possible to record a user-defined sequence of
key presses so that, after switching on the instrument, a particular screen can
be displayed after the Level & Plummet screen instead of the Main Menu.
For example, the general Settings screen for configuring the instrument set-
tings.
1. Select Settings from the Main Menu.
2. On the Tools page, select Startup.
1. Press Record in the Startup screen.
2. Press Cont to confirm the information message and begin the
recording process.
3. The next key presses are stored, up to a maximum of 64. To end the
recording press ESC.
4. If the auto start Status is set to Active, the stored key presses will
be executed automatically after switching on the instrument.
The automatic start sequence has the same effect as pressing the keys man-
ually. Certain instrument settings cannot be made in this way. Relative entries
such as automatically setting EDM Mode: Precise&Fast upon switching on
the instrument, are not possible.

System Information

The Info screen displays:
Instrument, system and firmware information
•
Maintenance and service dates
•
Memory usage
•
• Settings for the date and time
☞ Please provide the instrument-related information, such as instrument
type, serial number and equipment number, as well as the firmware
version and build number when contacting support.
Description
Displays the current adjustment values that
have been set for Hz-Collimation, V-index
and Tilt Axis.
Defines the time period from the last adjust-
ment to when a reminder message should
display to do another adjustment. Options
are: Never, 2 weeks, 1 month, 3 months,
6 months, 12months.
The message will display the next time the
instrument is switched on after the time
period has been reached.
Settings