Leica TS03 User Manual page 184

Status information on
the instrument
Report stolen
instrument
Locate stolen instru-
ment
184
1. Select Settings from the Main Menu.
2. On the Tools page, select Info.
3. Go to page 4/4 or Dates.
4. mySec.Renewal Date:
Displays the date when the instrument must be connected to mySe-
curity. The date is transferred from myWorld to the instrument.
☞
Ten days before the mySec.Renewal Date, a reminder message is
displayed each time the instrument is turned on.
☞
When the mySec.Renewal Date has been exceeded, a message
informs about the instrument lock. Go to myWorld to renew the theft
protection.
1. Go to myWorld@Leica Geosystems
(https://myworld.leica-geosystems.com).
2. Select myTrustedServices/mySecurity.
3. Click the check box to select an instrument.
4. Click Details.
5. In the General section, click Report as Stolen.
6. A warning comes up to confirm device as stolen.
Click OK.
7. The Status of the instrument changes to Stolen!.
A Leica Geosystems service centre informs local authorities if such an
instrument turns up.
If a reported, stolen instrument is registered to myWorld, then the IP address
of the computer is logged. The IP address is used to locate the instrument.
In myWorld/myTrustedServices/mySecurity, the Status of the instrument
changes to Located.
Clicking Show Location shows:
The date and time when the instrument was located
•
The IP address of the computer
•
A link to show the location on a map
•
mySecurity