Leica TS03 User Manual page 155

Access
Quick coding step-by-
step
Messages
Coding
The quick code number can be assigned when the code is created in the Cod-
ing screen, in the Codelist Manager in Leica Infinity or a special TS Tools collec-
tion, or it is assigned in accordance with the order in which the codes were
entered, for example, 01 -> first code in the code list ... 10 -> tenth code in
the code list.
1. Select Apps from the Main Menu.
2. Select Survey from the Programs Menu.
3. Press Q-Code.
1. Press Q-Code.
2. Enter a two-digit number on the keypad.
☞
A two-digit code must always be entered on the keypad
even if only a one-digit code was assigned.
For example: 4 -> enter 04.
3. The code is selected, the measurement triggered and the measured
data and code saved. The name of the selected code is displayed
after the measurement.
4. Press Q-Code again to end quick coding.
The following are important messages or warnings that may appear.
Messages
Cannot edit attribute!
No codelist available !
Code not found!
Description
Attribute with fixed status cannot be
changed.
No codelist in memory. Manual input for
code and attributes are called automatically.
No code is assigned to the entered number.
155