Screen & Audio Settings - Leica TS03 User Manual

5.4
Access
50
Field Option
Ascending
Code Record Before
Meas. or
After Meas.
Code
Reset after
Rec
Permanent
Data Output
Internal
Memory
Interface
GSI-Format
GSI 8
GSI 16
GSI-Mask
Mask 1
Mask 2
Mask 3
Screen & Audio Settings
1. Select Settings from the Main Menu.
2. On the General page, select Screen....
3. Press the button to scroll through the screens of available set-
tings.
Description
Lists are ordered in ascending order of sort
type.
Sets if the codeblock is saved before or after
the measurement. Refer to "9 Coding".
Sets if the code will be used for one, or
many, measurements.
The set code is cleared from the measure-
ment screen after Meas or Store is selected.
The set code remains in the measurement
screen until manually deleted.
Sets the location for data storage.
All data is recorded in the internal memory.
Data which is normally stored in the onboard
data base will be sent to the interface selec-
ted in the Interface Settings screen
This Data Output setting is only required if
an external storage device is connected and
measurements are started at the instrument
with Dist/Store or Meas. This setting is not
required if the instrument is totally controlled
by a datalogger.
Sets the GSI output format.
81..00+12345678
81..00+1234567890123456
Sets the GSI output mask.
PtID, Hz, V, SD, ppm+mm, hr, hi
PtID, Hz, V, SD, E, N, H, hr
StationID, E, N, H, hi (Station)
StationID, Ori, E, N, H, hi (Station Result)
PtID, E, N, H (Control)
PtID, Hz, V (Set Azimuth)
PtID, Hz, V, SD, ppm+mm, hr, E, N, H (Meas-
urement)
Settings