Leica TS03 User Manual page 147

Access
Cylindrical Offset
Favourites
Hz1
d
α
Hz2
P0
TSOX_023
P0 Instrument station
P1 Centre point of cylindrical object
Hz1 Horizontal angle to a point on the left side of the object
Hz2 Horizontal angle to a point on the right side of the object
d Distance to the object in the middle between Hz1 and Hz2
R Radius of cylinder
a
Azimuth from Hz1 to Hz2
Press Cylindr from the Offset screen.
Key Description
HzLeft To trigger measurement for the left side of the object.
HzRight To trigger measurement for the right side of the object.
Description of fields
Field Option
Hz Left Display only
Hz Right Display only
Display only
ΔHz
PrismOffset Editable field
R
P1
Description
Measured horizontal direction to the left side
of the object. Using the verticalhair, aim at
the left side of the object, then press
HzLeft.
Measured horizontal direction to the right
side of the object. Using the verticalhair, aim
at the right side of the object, then press
HzRight.
Deviation angle. Rotate the instrument to
aim in the direction of the centre point of
the cylindrical object, such that DHz is zero.
Prism offset distance between the centre of
the prism and the surface of the object to be
measured. If the EDM mode is Non-Prism,
the value is set to zero automatically.
147