Loading Software - Leica TS03 User Manual

Deactivate PIN code
step-by-step
☞
5.14
Description
Access
☞
Loading firmware and
languages step-by-
step
66
If the PUK code entered is correct then the instrument will start up and reset
the PIN code to default value 0 and Use PIN-Code: Off.
1. Select Settings from the Main Menu.
2. On the Tools page, select PIN.
3. Enter the current PIN in PIN-Code:.
4. Accept with Cont.
5. Deactivate PIN protection by setting Use PIN-Code: Off.
6. Accept with Cont.
The instrument is now no longer protected against unauthorised use.

Loading Software

Uploads are possible from the USB memory stick or the SD card.
Alternatively use myWorld to upload files.
1. Select Settings from the Main Menu.
2. On the Tools page, select Load FW.
Never disconnect the power supply during the system upload process. The bat-
tery must be at least 80% capacity before commencing the upload.
☞ All firmware and language files must be stored in the \SYSTEM folder
to be transferred to the instrument. The upload file has the extension
*.fw.
To load firmware and languages at once
☞
All freely available languages are installed automatically with a firm-
ware upload.
1. Select F1 Firmware. The Select File! screen will appear.
2. Select the firmware file from the \SYSTEM folder of the USB memory
stick or SD card.
3. Press Cont.
4. Once successfully loaded, the system will shut down and restart
again automatically.
To load language files separately
1. Select F2 Language.
2. Select the language file from the \SYSTEM folder of the USB memory
stick or SD card.
3. Press Cont.
Settings