Dtm Volume - Leica TS03 User Manual

7.9.4
☞

DTM Volume

108
Description of fields
Field Options
A 2D Display only
A 3D Display only
Next step
1. Press Calc to calculate area and volume and proceed to the Area to
Ref. Plane Results screen.
2. In the Area to Ref. Plane Results screen.
•
View the area in ha and m
Press NewArea to define a new area.
•
Or, press End to exit the app.
•
DTM Volume
The breakline points must be located within the boundary of the defined area.
1. Measure or select existing points to define the area.
2. The 2D and 3D areas are calculated automatically and displayed once
three points have been measured or selected.
3. Press Calc.
4. Press @BLPt.
5. Measure or select points on the breakline. These points are then
used to calculate a volume.
6. Press Calc.
Description
Two-dimensional area calculated by projec-
tion onto a horizontal plane.
Three-dimensional area calculated by projec-
tion onto the manually defined reference
plane.
The 3D area is calculated automatically after
measuring or selecting three points.
2
as well as the perimeter of the area.
Apps