Road 3D; Starting - Leica TS03 User Manual

Enter stakeout values
7.13
7.13.1
Description
Road 3D methods
☞
Road 3D step-by-step
Apps
Next step
• If in stakeout mode, press Cont to begin staking out.
Or, if in measurement mode, press Meas to measure and record.
•

Road 3D

Starting

Road 3D is an app used to stake out points or for as-built checks relative to a
road alignment, including slopes. It supports the following features:
Horizontal alignments with the elements straight, curve, and spiral (entry
•
and exit as well as partial).
Vertical alignments with the elements straight, curve and quadratic parab-
•
ola.
Upload of horizontal and vertical alignments which are in gsi data format
•
of Leica Infinity Road Line Editor.
• Creation, view and deletion of alignments onboard.
Use of design height of vertical alignments or manually entered heights.
•
Log file via Format manager of Leica Infinity.
•
Road 3D has the following subapps:
Subapp Check
•
Subapp Stake
•
• Subapp Check Slope
Subapp Stake Slope
•
The app can be trialled 15 times. After 15 trials, it is necessary to enter the
licence code.
1. Create or upload road alignments.
2. Select horizontal and/or vertical alignment files.
3. Define stake/check/slope parameter.
4. Select one of the Road 3D subapps.
121