Edm Settings - Leica TS03 User Manual

5.5
Description
Access

EDM Settings

52
Field Option
Setout Beep On
Off
EDM Settings
The settings on this screen define the active EDM, Electronic Distance
Measurement. Different settings for measurements are available with Non-
Prism (NP) and Prism (P) EDM modes.
1. Select Settings from the Main Menu.
2. On the General page, select EDM.
3. Press the button to scroll through the screens of available set-
tings.
Key Description
Atmos To enter atmospheric data ppm.
Ind.PPM To enter an individual ppm value.
To enter projection scale details.
Scale
To view EDM Signal reflection value.
Signal
To view the EDM frequency.
Freq.
Description of fields
Field Description
EDM Mode Prism
Non-Prism
Tape
Description
The instrument beeps when the distance
from the current position to the point to be
staked is ≤ 0.5 m.
The closer the prism is to the point to be
staked the faster the beeps will be.
Beep is deactivated.
Description
For distance measurements using prisms.
For distance measurements without prisms.
For distance measurements using Retro
reflective targets (3 mm + 2 ppm).
Settings