Check Slope - Leica TS03 User Manual

Sign convention
Next step
7.13.7
Description
☞
Apps
Field Option
ΔH Aln Display only
Aln Display only
Cut situation
P1
d
c
P2
P2
TSOX_057
Fill situation
P2
P2
P1
d
TSOX_058
• Either, press Meas to measure and record.
Or, press ESC to return to the Setout/Check/Slope values screen.
•

Check Slope

The subapp Check Slope is used for as-built checks and to get information
about slopes, for example on a natural surface. If the parameter offset left/
right and height difference are not entered, the point on the horizontal align-
ment is the hinge point.
h
a
b
c
d
j
i
f
TSOX_055
Defined chainage and increment values will not be considered.
Description
Height difference to the alignment. The verti-
cal offset between defined height at the cur-
rent chainage, and the measured position,
excluding the defined height difference.
Slope distance from the measured point to
the alignment.
P1 Measured point
a
P2 Catch point
b
a
b
c
d
P1 Measured point
a
b
P2 Catch point
a
b
c
c
d
P1 Measured point
g a
b
c
e
d
e
P1
f
g
h
i
j
Horizontal alignment
Hinge point
Cut
D Offset to catch point
Horizontal alignment
Hinge point
Fill
D Offset to catch point
Horizontal alignment
Defined offset
Defined height difference
Hinge point
Actual slope
Natural surface
Offset to hinge point
Offset to alignment
Height difference to hinge
point
Height difference to align-
ment
133