Point Symbols - Leica TS03 User Manual

Overview of keys,
softkeys and icons
10.4.3
Symbols
158
The softkeys are available regardless of the mode in which MapView was
accessed and always perform the same functions.
On the right side of the screen, a toolbar with icons is available. Some func-
tions of the toolbar can also be performed by using a softkey or key instead.
Refer to the following table for a description of the toolbar functions and their
respective softkey/key equivalents, if available.
The softkeys described in this table are standard on all MapView screens. For
descriptions of mode-specific softkeys, see appropriate chapters.
Icon Key or
Softkey
Fit
Zoom +
Zoom -
-
Ctr.Tgt
Ctr.St.
-
- Tap on
screen with
stylus, hold
and move
OR
Left/right/up/
down arrow
key

Point Symbols

Symbol Description
Fixpoint. Show in Map: Fixpoints or Show in Map: Meas
& Fixpts must be selected in Screen & Audio Settings,
Map page.
Fixpoint active
Description
The fit icon fits all displayable data, according
to filters and the map configuration, into the
screen area, using the largest possible scale.
To zoom into the map.
To zoom out of the map.
The windowing icon zooms to a specified
area window. An area window can be drawn
by dragging the stylus on the screen in a
diagonal line to make a rectangular area or
by tapping twice on the screen to define
diagonally opposite corners of a rectangular
area. This action causes the screen to zoom
to the selected area.
To centre the target. Refer to "5.1 Work Set-
tings".
To centre the instrument. Refer to "5.1 Work
Settings".
To configure MapView. Refer to "10.3 Config-
uring MapView".
To move the view of a map up and down as
well as left and right. This is particularly use-
ful when you have zoomed in on a view, and
want to move the view around to see other
areas of interest.
MapView Interactive Display Feature