Cylindrical Offset - Leica TS03 User Manual

Enter offset values
8.2.2
Description
146
Key Description
Default To reset offset values to 0.
Cylindr To enter cylindrical offsets.
Description of fields
Field Option
Trav. Off.
Length Off.
Height Off.
Mode
Reset after
REC
Cylindr
• Either, press Cont to calculate the corrected values and return to the app
from which the offset favourite was started. The corrected angle and dis-
tances are displayed as soon as a valid distance measurement has been
triggered or exists.
Or, press Cylindr to enter cylindrical offsets. Refer to "8.2.2 Cylindrical Off-
•
set".

Cylindrical Offset

Determines the coordinates of the centre point of cylindrical objects and their
radius. The horizontal angle to points on both the left and right sides of the
object are measured, and the distance to the object as well.
Description
Perpendicular offset. Positive if the offset
point is to the right of the measured point.
Longitudinal offset. Positive if the offset
point is further away than the measured
point.
Height offset. Positive if the offset point is
higher than the measured point.
Period for which the offset is to apply.
☞
The offset values are always reset
to 0 when the app is quit.
The offset values are reset to 0 after the
point is saved.
The offset values are applied to all further
measurements.
Favourites