Leica TS03 User Manual page 76

Sight target point
Station Setup Result
76
1. Enter the point ID and height of the target.
2. Measure the Hz angle and repeat the measurement in the ohter
face:
Face
3. Press Set to set the new orientation. The station setup is complete.
The remaining screens are available for all methods except Ori. with Angle and
Local Resection.
Sight the target point and select Meas, or Dist and Store to measure to the
target point.
Key Description
F1 Measure To return to the Enter Target Point screen to measure more
more points points.
F2 Measure To measure the same target point in another face.
in other
face
F3 Access To change the accuracy limit values.
Tolerances
F4 Compute To calculate and display the station coordinates.
Description of symbols
Symbol Description
Standard deviation/value within the defined limit
Standard deviation/value exceeds the defined limit
No value calculated
Apps