Check - Leica TS03 User Manual

Next step
7.13.5
Description
☞
Access
Apps
Field Option
D Display only
Display only
ΔHeight
Display only
ΔChain
Display only
ΔOffset
Def. East Display only
Def. North Display only
Def. Height Display only
Either, press Meas to measure and record.
•
Or, press ESC to return to the Setout/Check/Slope values screen.
•

Check

The subapp Check is used for as-built checks. The points can be measured or
selected from the memory. The chainage and offset values are relative to an
existing horizontal alignment, and the height difference is relative to a vertical
alignment or manually entered height.
b
P1
c-
a
P0
TSOX_053
Defined chainage and increment values will not be considered in the subapp
Check.
Press Check from the Setout/Check/Slope values screen.
Description
Horizontal offset: Positive if the stake out
point is further away than the measured
point.
Height offset: Positive if the stake out point
is higher than the measured point.
Longitudinal offset: Positive if the stake out
point is further away than the measured
point.
Perpendicular offset: Positive if the stake out
point is to the right of the measured point.
Calculated East coordinate of the stake out
point.
Calculated North coordinate of the stake out
point.
Calculated Height of the stake out point.
P2
P0 Instrument station
c+ d+
P1 Target point
d-
P2 Target point
a
b
c+ Offset, positive
c-
d+ Height difference, positive
d- Height difference, negative
Horizontal alignment
Chainage
Offset, negative
129