Leica TS03 User Manual page 88

Access
Orthogonal stakeout
Reference Line - Set-
out
88
Example orthogonal stakeout
P0
P1
TSOX_038
Press Setout from the Reference Line - Info screen.
Enter the stake out elements for the target points to be staked out relative to
the reference line.
Decription of fields
Field Option
Line Display only
Offs Display only
Height Display only
Next step
Press Cont to proceed to measurement mode.
The signs for the distance and angle differences are correction values (required
minus actual). The arrows indicate the direction to move to get to the stake
out point.
Key Description
Next Pt To add the next point to be staked out.
P2
P0 Instrument station
P1 Start point
P4
P2 End point
a
b
P3 Stake out point
P3
P4 Measured point
a D Parallel offset
D Longitudinal offset
b
Description
Longitudinal offset: Positive if stake out point
is further away from the reference line.
Perpendicular offset: Positive if stake out
point is to the right of the reference line.
Height offset: Positive if stake out point is
higher than the reference line.
Apps