Leica TS03 User Manual page 83

Setout
Apps
Key Description
To enter the direction and horizontal distance to a stake out
point.
B&Dist
Manual To manually enter coordinates of a point.
Survey To switch to the Survey app. Press ESC to return to the Set-
out screen.
☞ Refer to "3.8 Graphic Symbols" for a description of the graphic ele-
ments.
Description of fields
Field Option
Find Display only
Radius Selectable list
Range Display only
Pt Type/ID Display only
Display only
ΔHz
D Display only
D Display only
Display only
ΔL
Display only
ΔT
Display only
ΔH
Description
Available when no filter is applied. Value for
Point ID search. After entry, the firmware
searches for matching points, and displays
these in PtID: If a matching point doesn't
exist the pointsearch screen opens.
Available when the point filter is active. the
defined radius from a particular point.
Available when the range is active. The
defined range of points. For long point IDs,
the last digits are be shown and the first dig-
its are cut.
Displays the type of point selected.
• Fixpt., or
Meas.
•
Angle offset: Positive if stake out point is to
the right of the measured point.
Horizontal offset: Positive if stake out point
is further away than the measured point.
Height offset: Positive if stake out point is
higher than the measured point.
Longitudinal offset: Positive if stake out point
is further away than the measured point.
Perpendicular offset: Positive if stake out
point is to the right of the measured point.
Height offset: Positive if stake out point is
higher than the measured point.
83