Leica TS03 User Manual page 93

Messages
Next step
Apps
Description of fields
Field Option
Segm Selectable list
CumL Selectable list
Display only
ΔHz
D
Display only
D Display only
Display only
ΔL
Display only
ΔO
The following are important messages or warnings that may appear.
Messages
Baseline too short!
Coordinates invalid!
Recording to interface!
Either, press Meas to measure and record.
•
Or, press ESC to return to the Define Line Segment screen and from
•
there, press Back to return to the Reference Line screen.
• Or, continue selecting ESC to exit the app.
Description
Segment number. Includes the misclosure
segment, if applicable.
Cumulation of the segment lengths. Changes
with the current number of segments.
Includes the misclosure segment length if
applicable.
Horizontal direction from the measured point
to the stake out point. Positive if the tele-
scope must be turned clockwise to the stake
out point.
Horizontal distance from the measured point
to the stake out point. Positive if the stake
out point is further away than the measured
point.
Height difference from the measured point to
the stake out point. Positive if the stake out
point is higher than the measured point.
Longitudinal distance from the measured
point to the stake out point. Positive if stake
out point is further away than the measured
point.
Perpendicular distance from the measured
point to the stake out point. Positive if stake
out point is to the right of the measured
point.
Description
Base line is shorter than 1 cm. Choose base
points such that the horizontal separation of
both points is at least 1 cm.
No coordinates or invalid coordinates for a
point. Ensure that points used have at least
Easting and Northing coordinates.
Data Output is set to Bluetooth in the
Data Settings Menu. To be able to success-
fully start reference line, Data Output must
be set to Internal Memory.
93