Spar-Mounted Installations For Ps 1, Ps 1.5; Figure 2-12. Sspa Spar Mount Installation Example - Comtech EF Data LPOD Series Installation And Operation Manual

2.4.4 Spar-Mounted Installations for PS 1, PS 1.5

PS 2 units may not be spar-mounted due to weight considerations.
PS 1 and PS 1.5 standalone configurations, in addition to satellite dish support pole mounted
installations, may be installed on the antenna spar. Figure 2-12 shows a typical CEFD spar mount
SSPA installation.
The kit that is required for the installation of your LPOD system (Figure 2-13) is determined by the
spar that is used by the antenna's manufacturer.
System Connectors, Installation, and Startup
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)

Figure 2-12. SSPA Spar Mount Installation Example

2–20
Revision 15
MN-LPOD