Status | Status; Status | Mop - Comtech EF Data LPOD-R PS .5 Installation And Operation Manual

LPOD-R Outdoor Amplifier / Block Up Converter
Ethernet Interface Operation
To reset the Terminal Status Change from YES to NO, click Clear.

4.5.4.2 Status | Status

Use this read-only page see general status data for the LPOD-R.
Unlike the pages that you must refresh manually, the Status | Status
page updates automatically once every 10 seconds. You can still refresh
the page manually, if desired.

4.5.4.3 Status | MOP

Use this read-only page to see details of the unit's Maximum Operating Point
(MOP) data. Refresh the page to see the latest data.
Figure 4-12. Status | Status Page
Figure 4-13. Status | MOP Page
4–19
MN-LPODR
Revision 3