Multi I/O Unit Setting
5.2 Output Terminal Setting
5.2.1 Overview
On Multi Input/Output Unit, the allocation of output terminal polarities and output numbers can
be switched by the setting of the software.
• Output terminal polarities can be selected from sink, source, P-type push-pull (positive logic)
and N-type push-pull (negative logic).
• The item "Allocate contacts of output terminals" is used when a single I/O signal is allocated
to two output circuits. It is possible to apply them as line driver output by using this function.
• This setting can be made for four output circuits and four output points each.
Multi I/O Unit Setting dialog box
5-4