10.3.2 Before Turning On the Power
System configuration example
Items to check before turning on the power
No.
Item
Checking connections to
①
the various devices
Checking the installation of
②
the external safety circuit
Checking the installation of
③
the safety circuit based on
the unit
Checking the procedure
⑤
settings for turning on the
power supplies
Checking the CPU mode
⑤
selection switch
Description
Check to make sure the various devices have been connected as
indicated by the design.
Check to make sure the safety circuit (wiring and installation of over
limit switch) based on an external circuit has been installed securely.
Check the connection between the unit and over limit switches. Check
the installation condition of the over limit switches.
Make sure settings have been entered so that power supplies will be
turned on according to the procedure outlined in section "Procedure for
Turning On the Power".
Set the CPU unit to PROG. mode. The CPU unit in RUN mode may
operate unexpectedly.
10.3 Initial Operation Check
10-11