Panasonic FP7 User Manual page 69

The following figure shows the example that "High-speed counter (Phase input)"
is allocated to the inputs (X100-X103) of multi I/O unit. The output for control is
automatically allocated to the outputs (Y110-Y111) of the unit's internal I/O.
The set values will be effective when they are downloaded with programs or other
configuration information as a project.
 Settings of counter elapsed value and counter preset value
The values set in the "High-speed counter Advanced" dialog box are reflected as follows.
Item
Counter elapsed
value
Counter preset
value
Operation
The value set in the "Counter elapsed value" in the dialog box
is set in the elapsed value area after switching the mode to
RUN mode.
The value set in the "Counter preset value" in the dialog box
is set in the elapsed value area when the reset operation is
performed with a control signal.
7.1 Counter Function
Related unit
memory
UM00110-UM00117
UM00118-UM0011F
7-5