Comparison Match Interrupt - Panasonic FP7 User Manual

Interrupt Function

6.2.2 Comparison Match Interrupt

 Overview
• The high-speed counters are allocated to the inputs (X100-X103) of the multi I/O unit.
(For the interrupt occurred when comparison values match)
• The interrupt (INT0) occurs when the counted pulse number agrees with the "comparison
output setting value" that has been specified. The interrupt program from INT0 of a
sequence program until IRET is executed, and the output (Y160) of the 32-point output unit
is output at a high speed.
(For the interrupt occurred at the same time as comparison output)
• The interrupt (INT0) occurs at the same time as the comparison output. The interrupt
program from INT0 of a sequence program until IRET is executed, and the output (Y160) of
the 32-point output unit is output at a high speed.
0 V (24 V DC)
6-8
(CH0 IN-A) X100
(CH0 IN-B) X101
(CH0 RST) X102
(CH0 MASK)
X103
X140
Multi I/O unit
WX10-WX13 WX14
WY10-WY13 WX15
32-point input unit
32-point output unit
WY16
WY17
Y160