Multi I/O Unit Setting
Configuration using FPWIN GR7
PROCEDURE
1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.
2. Select a unit.
The basic setup screen of "Multi I/O Unit Setting" will be displayed.
3. Set "Output terminal polarity".
Set the terminal number B11-B14 to Sink, and B15-B18 to Source.
4. Check the box of "Allocate contacts of output terminals" and set terminal
numbers allocated to each contact.
Set the both terminals B11-B14 and B15-B18 to Y108-Y10B.
(B11-14 is Sink and B15-18 is Source.)
5-8