10.5.5 Check on Parameter Data
The following procedure is explained on the condition that the Configurator PMX has already
started.
PROCEDURE
1. Select "Debug" > "Check Parameter and Data Values" from the menu bar.
A message box will be displayed to show the check result. If there is an error in
the settings for the positioning data tables, an error message will appear and the
cursor will move to the corresponding error position.
10.5.6 Writing Parameters to Unit
• Set parameter information is transferred to the CPU unit.
• The following procedure is explained on the condition that the Configurator PMX has already
started.
PROCEDURE
1. Select "File" > "Save changes and exit" from the menu bar of the
Configurator PMX.
2. When "Do you save the setting?" appears, press [Yes (Y)].
3. Select "Online" > "Download To PLC" from the FPWIN GR7 menu bar.
Positioning data will also be downloaded to the CPU unit together with programs
comment and system register information.
"File" > "Download positioning table" in the menu bar of Configurator PMX is not
available for the Multi I/O Unit (H type).
10.5 Positioning Table Settings (Configurator PMX)
10-29