Unit Type And Product Number - Panasonic FP7 User Manual

 Equipped with various functions
One unit is equipped with the following functions.
Function name Overview
Besides the interrupt control by external inputs, the interrupt control by the comparison
Interrupt match with counter elapsed values is also available. High-speed response independent of
scan time can be obtained.
The count method can be selected from direction distinction, individual input, and phase
input. Frequencies can also be measured. An elapsed value hold function for storing the
Counter
count value when a trigger occurs is provided. The count value independent of the scan
time of PLC can be confirmed.
The output can be obtained by comparing the counter elapsed value and an aribtrary value.
Comparison
It can be used as the output of multistage counter by optionally combining with counter
output
channels.
The pulse output function is provided which achieves an easy positioning control with one
unit. The control by the PWM output is also be available. The counter for the pulse
Pulse output /
output/PWM output is equipped with four channels, and it can also be applied to operations
PWM output
such as switching the frequency at the time of constant pulse output or target value
matched.
User programs can be simplified by adopting the table setting.
Positioning(Note1) Positioning controls can be selected the follwoing four patterns; E-point control, P-point
control, C-point control and J-point control.
(Note): The positioning function is available only for FP7 Multi I/O Unit (H type).

1.1.2 Unit Type and Product Number

 Unit type and available functions
Product name
Product no.
Interrupt function
Counter function
Comparison output function
Pulse output/PWM output
function
Positioning function
FP7 Multi Input/Output Unit
AFP7MXY32DWD
Available
Available
Available
Available
－
1.1 Unit Functions and Operation
FP7 Multi Input/Output Unit
(H type)
AFP7MXY32DWDH
Available
Available
Available
Available
Available
1-3