3.2 Wiring I/O Unit of Terminal Block Type
3.2 Wiring I/O Unit of Terminal Block Type
3.2.1 Suitable Wires and Solderless Terminals
■
Suitable wires
Suitable wires
AWG22 to 14 (0.3 mm
Solderless terminal
M3 terminal screws are used for the terminal. The following suitable solderless terminals are
recommended for the wiring to the terminals.
■
Suitable solderless terminal
Manufacturer
J.S.T. Mfg Co., Ltd.
3.2.2 Wiring to Terminal Block
Remove the terminal block before beginning the wiring operations.
To remove the terminal block, push downward the release lever located at the top of the
terminal block.
3-6
2
2
to 2.0 mm
)
Shape
Fork type
Round type
Fork type
Round type
Tightening torque
0.5 to 0.6 N・m
Part No.
1.25-B3A
1.25-MS3
2-N3A
2-MS3
Suitable wires
2
0.25 to 1.65 mm
2
1.04 to 2.63 mm
WUME-FP7DIO-05