Panasonic FP7 User Manual page 223

KEY POINTS
• Set to agree the poloarities of outputs to wirings. For details of the output
specifications, refer to "3.1.4 Output Specifications".
 Output contact terminal interrupt setting
Unit
memory no.
Name
（Hex）
Output contact
UM00105 terminal
interrupt setting
Allocation of unit memories
UM no.
Bit no. b15-b12
Terminal
B18-B15
number
I/O number
YF-YC
Setting value
Initial value
H F
(Hex)
The values (Hex) of terminal number and I/O number (for four outputs) are written to the four
bits of the unit memory.
Setting
Output contact
value
H0 Y0-Y3
H1 Y4-Y7
H2 Y8-YB
H3 YC-YF
H4 to HE Invalid (Note 1)
HF (Default) Basic arrangement (Note 2)
(Note 1): Do not use this setting.
(Note 2): The default value when the power is on has been set to "Not used".
Default
H FFFF
UM00105
b11-b8 b7-b4
B14-B11 A18-A15
YB-Y8 Y7-Y4
H F H F
13.4 Unit Memory Detailed Information
Setting range and description
Set the I/O numbers allocated to terminal
numbers.
b3-b0
A14-A11
Y3-Y0
H F
R W
A A
13-31