Positioning Function (H type)
10.4.2 Configuration Using Tool Software
The setting of the positioning function is specified in the configuration menu of FPWIN GR7.
Setting method
The following procedure describes the process when the Multi I/O Unit (H type) has been
already allocated in the I/O map.
PROCEDURE
1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.
The "Select Multi I/O Unit" dialog box will be displayed.
Go to step 2.
2. Select "H-type Multi I/O Unit", and press the [OK] button.
The "Multi I/O Unit Setting" dialog box will be displayed.
10-16