Wiring Of The Com Port Terminal Block; Suitable Wires And Tools - Panasonic FP-XH Series User Manual

2.2 Wiring of the COM Port Terminal Block

2.2 Wiring of the COM Port Terminal Block

2.2.1 Suitable Wires and Tools

The communication port has a screw-tightening type of terminal block. Use the following items
for wiring.
■
Suitable wires (stranded wire)
Size
AWG＃28 to 16
■
Suitable pole terminals
If a pole terminal is used, the following models should be used.
Manufacturer
Phoenix Contact
Co., Ltd.
■
Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact
Co., Ltd.
■
Use a special tool to tighten the terminal block of a communication block
To tighten terminals, use a screwdriver from Phoenix Contact (model No. SZS 0,4 x 2,5, product
No. 1205037, blade size 0.4 x 2.5) or a screwdriver from Panasonic (Product No. AFP0806).
The tightening torque should be 0.22 to 0.25 N∙m.
2-4
Nominal cross-sectional area
0.08 mm
Cross-
sectional Size
area
2
AWG #24
0.25 mm
2 AWG #22
0.34 mm
2 AWG #20
0.50 mm
Model No.
Part No.
CRIMPFOX 6T-F
2 2
to 1.00 mm
Part No.
With isolating
sleeve
AI 0,25 - 6 BU
AI 0,34 - 6 TQ
AI 0,5 - 6 WH
Product No.
1212038
Without isolating sleeve
A 0,25 - 7
A 0,34 - 7
A 0,5 - 6
WUME-FPXHCOMG-02