Counter Function
7.1.2 Configuration Using Tool Software
The setting of the counter function is specified in the configuration menu of FPWIN GR7.
Setting method
The following procedure shows the case that "High-speed counter (Phase input)" is allocated
to the inputs (X100-103) of the multi I/O unit registered in the starting word number 10. It also
describes the procedure when the multi I/O unit has been already allocated in the I/O map.
PROCEDURE
1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.
The "Mufti I/O Unit Setting" dialog box will be displayed. Select a unit to be used.
2. Select "High-speed counter" from the "Selection of function" tree, and
double-click an input number to which the high-speed counter is allocated.
The "High-speed counter Advanced" dialog box is displayed.
3. Select "Phase input (4 multiple)" from the "Function setting" drop-down list.
4. Input a preset value or upper and lower limit values as necessary.
5. Press the [OK] button.
The selected condition will be registered on the "Multi I/O Unit Setting" dialog box.
7-4